Simultaneous separation and determination of seven isoflavones in Radix Puerariae by capillary electrophoresis with a dual cyclodextrin system

A simple, comprehensive and efficient capillary electrophoresis method using a dual cyclodextrin system was developed for the simultaneous determination of seven isoflavones (3′‐methoxypuerarin, puerarin, 3′‐hydroxypuerarin, ononin, daidzin, daidzein and genistin). Baseline separations of the seven isoflavones were achieved within 11 min with the running buffer consisting of 35 mm sodium tetraborate, 9.0 mm sulfobutylether‐β‐cyclodextrin and 30 mm α‐cyclodextrin at pH 9.34, and peaks were detected at 254 nm. Other separation parameters included the separation voltage for 15 kV and the working temperature for 25°C. Under the optimum conditions, good linearities were obtained with linear correlation coefficients of seven isoflavones of 0.9978–0.9992. The limits of detection and the limits of quantification were 0.7–2.9 and 2.5–9.5 μg/mL, respectively. Excellent precision and accuracy were obtained. The intraday and interday precision ranged from 0.7 to 2.0% and from 0.8 to 1.9%, respectively. The recoveries of seven analytes were from 97.7 to 103.1%. This method was successfully applied to determine the seven analytes in Radix Puerariae and its preparations.     

On a Spanning K-tree Containing Specified Vertices in a Graph

Acta Mathematicae Applicatae Sinica, English Series - A k-tree is a tree with maximum degree at most k. In this paper, we give a sharp degree sum condition for a graph to have a spanning k-tree in...     

A rapid and sensitive UHPLC–MS/MS method for the determination of celosin A in rat plasma with application to pharmacokinetic study

Celosin A (CA), a natural compound isolated from Celosia argentea L., has been shown significant hepatoprotective effect on AHNP‐induced liver injury. This study described a rapid and sensitive ultra‐high‐pressure liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) assay for determination of CA in rat plasma. Methanol‐mediated precipitation was used for sample pretreatment. Chromatographic separation was achieved on a T3 column with gradient elution using water and acetonitrile as mobile phase. Determination was obtained using an electrospray ionization source in negative selected reaction monitoring mode at the transitions of m/z 793.3 → m/z 661.2 and m/z 955.6 → m/z 793.2 for CA and IS, respectively. The assay was linear over the concentration range 0.25–2500 ng/mL (r > 0.995) with a lowest limit of quantification (LLOQ) of 0.25 ng/mL. The intra‐ and inter‐day precisions (RSD) were 1.65–9.84 and 2.46–13.49%, respectively, while accuracy (RR) ranged from 96.21 to 99.45%, respectively. The recovery ranged from 95.09 to 102.22% and the matrix effect from 98.29 to 100.13%. The analyte was stable under the tested storage conditions. The method has been successfully applied to a preclinical pharmacokinetic study in rats after a single intravenous (2 mg/kg) or oral (50 mg/kg) administration. The oral bioavailability of CA was ~1.94%; in addition, there was no difference between male and female rats. This is the first time of the use of an UHPLC–MS/MS method for determination of CA concentration in rat plasma and for evaluation of its pharmacokinetic behavior.     

Lone-Pair Enhanced Birefringence in an Alkaline-Earth Metal Tin(II) Phosphate BaSn2(PO4)2

The first alkaline-earth metal tin(II) phosphate, BaSn₂(PO₄)₂, has been discovered, which consists of layered structures constructed from strictly alternating [SnO₃]⁴⁻ and [PO₄]³⁻ moieties. This compound is expected to have a large birefringence with Δn≈0.071 at 1064 nm, owing to the presence of stereochemically active lone pair metal cations.     

Efficient Syntheses of Traumatic Lactone and Rhizobialide

Herein, we report the total synthesis of traumatic lactone and rhizobialide by utilizing allenoic acid to construct the lactone ring. The key starting materials, allenoic acids, could be prepared by the ATA (allenation of terminal alkynes) of a terminal alkyne with an aldehyde that contained a protected hydroxyl group followed by hydrolysis. Importantly, the asymmetric synthesis could be realized just by replacing racemic diphenylprinol with (R)- or (S)-diphenylprinol to deliver the optically active allenoate.     

Mechanism of Catalytic Effect of Water Clusters on the Oxidation of Phosphine Gas

Russian Journal of Physical Chemistry A - The mechanism of PH3 oxidation is investigated at B3LYP/6-311+g (d, p) level using density functional theory calculation with n = 0–6 water molecules...     

Impact of post-injection strategy on the physicochemical properties and reactivity of diesel in-cylinder soot

Post injection has significant benefit in the reduction of diesel soot emissions. Therefore, there is a need to understand the effect of post-injection strategy on soot physicochemical properties and reactivity because they play an important role in soot oxidation process that governs the final soot emissions. This work focuses on the impact of post injection on the physicochemical properties and reactivity of diesel in-cylinder soot using a main plus post injection (M*P) and a single injection (M) strategy. The soot was sampled by a developed total cylinder sampling system, and the dividing points of soot formation-dominant and oxidation-dominant phases were used for studying the impacts of post injection on the characteristics of in-cylinder soot. The physicochemical properties of the soot samples, including primary particle size, nanostructure, carbon chemical state and surface functional groups, were characterized. The soot reactivity was evaluated in terms of peak temperature, burnout temperature and apparent activation energy. In the oxidation-dominant phase, the M*P soot initially possesses smaller primary particle size, shorter fringe length, larger tortuosity, lower sp²/sp³ hybridization ratio of carbon atoms and higher content of aliphatic CH groups than the M soot. The beneficial influence of physicochemical properties on soot reactivity when using post injection is validated by the thermogravimetric data, which shows that the M*P soot is more reactive than the M soot at the onset of the oxidation-dominant phase. In the M*P case, the soot generated from the main-injection combustion has lower reactivity than the soot from the post-injection combustion after they experience the soot formation-dominant phase. The results indicate that the use of post injection leads to in-cylinder soot with physicochemical properties that favor reactivity. The enhancement of reactivity means that the soot will be more readily oxidized in the subsequent combustion process, and consequently contributes to a reduction in final soot emissions.     

Two-component generalized Ragnisco–Tu equation and the Riemann–Hilbert problem

Theoretical and Mathematical Physics - Using the Riemann–Hilbert approach, we investigate the two-component generalized Ragnisco–Tu equation. The modified equation is integrable in the...     

Description of stability for linear time-invariant systems based on the first curvature

This paper focuses on using the first curvature κ(t) of trajectory to describe the stability of linear time-invariant system. We extend the results for two and three-dimensional systems (Wang, Sun, Song et al, arXiv:1808.00290) to n-dimensional systems. We prove that for a system $\text{◂=▸}\dot{r}(t)=\text{◂⋅▸}Ar(t)$, (a) if there exists a measurable set whose Lebesgue measure is greater than zero, such that $\text{◂≠▸}\underset{t\to +\infty }{\lim }\kappa (t)\ne 0$ or $\underset{t\to +\infty }{\lim }\kappa (t)$ does not exist for any initial value in this set, then the zero solution of the system is stable; (b) if the matrix A is invertible, and there exists a measurable set whose Lebesgue measure is greater than zero, such that $\text{◂=▸}\underset{t\to +\infty }{\lim }\kappa (t)=+\infty$ for any initial value in this set, then the zero solution of the system is asymptotically stable.     

Enzymatic Extraction of Bioactive and Self‐Assembling Wool Keratin for Biomedical Applications

Keratin is widely recognized as a high‐quality renewable protein resource for biomedical applications. Despite their extensive existence, keratin resources such as feathers, wool, and hair exhibit high stability and mechanical properties because of their high disulfide bond content. Consequently, keratin extraction is challenging and its application is greatly hindered. In this work, a biological extraction strategy is proposed for the preparation of bioactive keratin and the fabrication of self‐assembled keratin hydrogels (KHs). Based on moderate and controlled hydrolysis by keratinase, keratin with a high molecular weight of approximately 45 and 28 kDa that retain its intrinsic bioactivities is obtained. The keratin products show excellent ability to promote cell growth and migration and are conferred with significant antioxidant ability because of their intrinsically high cysteine content. In addition, without the presence of any cross‐linking agent, the extracted keratin can self‐assemble into injectable hydrogels. The KHs exhibit a porous network structure and 3D culture ability, showing potential in promoting wound healing. This enzyme‐driven keratin extraction strategy opens up a new approach for the preparation of keratin that can self‐assemble into injectable hydrogels for biomedical engineering.